How To Remove Plasti Dip From Alloy Wheels
How To Remove Plasti Dip From Alloy Wheels. How to remove plasti dip from rims? Mask off rubber with playing cards as shown.
Dirt, grease, or wax will keep the plasti dip from sticking to. Park your vehicle on a flat surface like a garage floor. Once done washing, drive around to dry off wheels and go over the remaining plasti dip with a micro fiber towel lightly dipped in acetone.
I Shoved Cards Between The Rubber And Rim.
Reach in between the rims to pull the plastic covers from your brakes. Slowly peel off the tape around your rims to completely remove it. Apply and brush kerosene into the rim surface only.
Let The Kerosene Sit For Around 6 To 8 Minutes.
Remove the overspray and throw it away; 5 how to remove plasti dip with mineral turpentine. This way you do not scratch the wheel or damage the tire.
Dip It In The Kerosene And Apply Carefully To The Rim.
Plasti dip can in fact be worked off pretty well by hand; I made a ring out of cardboard to go behind the rim to catch over spray but, in hind site it wasn't needed. Gas powerwasher was the easiest quickest route.
Use A Wooden Stick And Apply The Right Amount Of Force To Peel Off The Rubber Coat In The Rim.
Although this step is optional, we highly recommend it. Plasti dip gloss and sealant coats. Go back to the spot you soaked with paint thinner earlier.
Despite What They Say, Peeling Is Not That Simple.
Use a drywall scraper to remove the plasti dip. Clean the wheels before moving on to the next step. The first thing the wheel man has to do is remove the coating.
Post a Comment for "How To Remove Plasti Dip From Alloy Wheels"